A universal cable harness that greatly simplifies the installation of the device.

It consists of FLRY ducts intended for use in the automotive industry.

In addition, at the end of each wire there is a terminal for EMU plugs.

The beam consists of 43 wires with a length of 2.5 m each, including:

• 19 wires with a cross-section of 0.5mm2,
• 12 wires with a 0.75mm2 cross-section,
• 9 wires with a cross-section of 1mm2 (including 6 LGY cables designed for ignition coils),
• 3 wires with a cross-section of 1.5mm2.