Forged conncting rods Subaru Legacy EJ20 EJ25 STi 130.5mm Maxpeedingrods Titanium

Application

Compatible for Subaru Impreza STI EJ20 EJ22 EJ25 Engine
Compatible for Subaru Legacy EJ20 EJ22 EJ25 Engine
Compatible for Subaru Impreza STI compatible for Forester Legacy 2.0L Turbo (EJ205 Engine) 2002-2005
Compatible for Subaru Impreza STi 2.0L Turbo (EJ207 Engine) 1998-present
Compatible for Subaru Impreza 2.5L Turbo (EJ255 Engine) 2006-2014
Compatible for Subaru Impreza STI 2.5L Turbo (EJ257 Engine) 2004-2016
Compatible for Saab 9-2X 2005-2006
Compatible for Isuzu Aska 1990-1993
Compatible for Subaru Legacy for JDM 1989-2009
Compatible for Subaru Forester for JDM SF series (1997 – 2002)
Compatible for Subaru Impreza 2006-2014
Compatible for Subaru Forester XT 2004-2013
Compatible for Subaru Outback XT 2005, 2007-2009
Compatible for Subaru impreza 95-01
Compatible for Subaru Outback 95-96

Specification

Type: Forged 4340 aircraft chrome moly quality steel for racing
H-beam Conrods Quantity: 4 Pieces as showing in picture
Bolts: Including Genuine ARP 2000 3/8″ bolts  (Note: Extra cost for upgrading to ARP L19 bolts)
Advertised Horsepower Rating：200HP/piece
Top acceleration: 9000rpm
The connecting rods all include ARP 2000 bolts, which are rated at 220,000 psi, and the optional ARP L19 material at 260,000 psi is available as an upgraded product.
Warranty: one year warranty for any manufacturing defect

Dimensions

Center to center length: 130.5mm/5.137″
Big end diameter: 55mm/2.165″
Small end diameter: 23mm/0.905″
Big end width: 21.4mm/0.843″
Small end width: 21.4mm/0.843″

Feature

1. Titanizing can further improve the bending strength of the product
2. Titanizing will not affect the weight of the connecting rod
3. Provide a wear-resistant layer, which greatly prolongs the service life of the parts
4. Material: Titanizing Forged SAE 4340 Chrome Moly Steel for the highest strength and durability, dedicated for Racing.
5. Genuine ARP 2000 bolts ,Optional ARP L19 fasteners available as an upgrade.
6. H-Beam design reduces weight without compromising strength.
7.Heat-treating & Shot-peened for remained consistent and strong, Shot-peened finish to remove potential for stress risers.
8.100% CNC machined,Precision rod cap alignment dowels.
9.Bores finished to +/- .01 mm.
10.Balanced to within +/- 1 g per rod.
11. Each rod is magnetic particle tested to ensure free of flaws.
12.100% X-rayed, sonic tested.
13.Custom Service.

Note

* Please confirm the diemensions before purchasing
* Professional installation is highly recommended (No Instruction Included)
* For any needs please contact us