Application
- Compatible for Subaru Impreza STI EJ20 EJ22 EJ25 Engine
- Compatible for Subaru Legacy EJ20 EJ22 EJ25 Engine
- Compatible for Subaru Impreza STI compatible for Forester Legacy 2.0L Turbo (EJ205 Engine) 2002-2005
- Compatible for Subaru Impreza STi 2.0L Turbo (EJ207 Engine) 1998-present
- Compatible for Subaru Impreza 2.5L Turbo (EJ255 Engine) 2006-2014
- Compatible for Subaru Impreza STI 2.5L Turbo (EJ257 Engine) 2004-2016
- Compatible for Saab 9-2X 2005-2006
- Compatible for Isuzu Aska 1990-1993
- Compatible for Subaru Legacy for JDM 1989-2009
- Compatible for Subaru Forester for JDM SF series (1997 – 2002)
- Compatible for Subaru Impreza 2006-2014
- Compatible for Subaru Forester XT 2004-2013
- Compatible for Subaru Outback XT 2005, 2007-2009
- Compatible for Subaru impreza 95-01
- Compatible for Subaru Outback 95-96
Specification
– Performance Con Rods
– Type: Forged 4340 aircraft chrome moly quality steel for racing
– H-beam Conrods Quantity: 4 Pieces as showing in picture
– Bolts: Including Genuine ARP 2000 bolts
– Note: Extra cost for upgrading to ARP L19 bolts
– Bolts Size: ARP 2000 3/8″ bolts
– Tolerance: Balanced to +/- 1 gram in set
– Piston Bolt Hole: +-4/1000mm
– Advertised Horsepower Rating： 200HP/piece
– Strength of the fastening (PSI): 200,000/220,000 PSI Torque: 48ft ≈ 65 NM
– The connecting rods all include ARP 2000 bolts, which are rated at 220,000 psi, and the optional ARP L19 material at 260,000 psi is available as an upgraded product.
– Top acceleration: 9000rpm
Dimensions
- Center to center length: 130.5mm/5.137″
- Big end diameter: 55mm/2.165″
- Small end diameter: 23mm/0.905″
- Big end width: 21.4mm/0.843″
- Small end width: 21.4mm/0.843″
Feature
– Material: Forged SAE 4340 Chrome Moly Steel for the highest strength and durability, dedicated for Racing；
– Genuine ARP 2000 bolts ,Optional ARP L9 fasteners available as an upgrade；
– H-Beam design reduces weight without compromising strength；
– Heat-treating & Shot-peened for remained consistent and strong. Shot-peened finish to remove potential for stress risers；
– 100% CNC machined,Precision rod cap alignment dowels；
– Each rod is magnetic particle tested to ensure free of flaws；
– 100% X-rayed, sonic tested
Note
– Professional installation is highly recommended (No Instruction Included)
Arvustused
Tooteülevaateid veel ei ole.